Skip to content
PigmentMix

Free · No sign-up · Works offline in your browser

Mix any color from the paints you already own

Pick a target color or click a point on a photo. PigmentMix finds two- and three-paint recipes with simple part ratios.

1. Target color

2. Your paints

15 selected

Tick the paints you own. Your selection is saved in this browser.

Add your own paint

3. Recipes

Recipe 1

ΔE 0.4 · practically identical
Target#6b7a2e
Predicted mix#6a7a2b
  • Yellow Ochre15
  • Sap Green10
  • Titanium White4

Ratio: 15 : 10 : 4

Recipe 2

ΔE 0.6 · practically identical
Target#6b7a2e
Predicted mix#6b7a31
  • Lemon Yellow15
  • Sap Green6
  • Ivory Black1

Ratio: 15 : 6 : 1

Recipe 3

ΔE 0.6 · practically identical
Target#6b7a2e
Predicted mix#6a7930
  • Yellow Ochre20
  • Sap Green5
  • Phthalo Green1

Ratio: 20 : 5 : 1

First-try ratio: mix a small amount, paint a swatch next to your reference and adjust by eye.

ΔE (CIEDE2000) measures how different two colors look. Below 2 is hard to tell apart; above 10 is clearly different.

Saved recipes

No saved recipes yet. Saved recipes stay in this browser.

How it works

  1. 1

    Choose a target

    Use the color picker, type a hex code, or open a photo and click the spot you want to paint.

  2. 2

    Tick your paints

    Select the tubes on your desk or add your own paint by color. Your palette is remembered in this browser.

  3. 3

    Mix the first try

    Follow the part ratio, paint a test swatch next to your reference and adjust by eye.

Ready-made recipes for colors people often ask how to mix, calculated with a basic student palette.

See all color recipes

Frequently asked questions

How does PigmentMix calculate paint ratios?

It turns every paint into an estimated light-reflection curve and mixes those curves with the Kubelka–Munk model, which describes how pigments absorb and scatter light. It then tries every pair and trio of your paints over a grid of simple ratios and keeps the closest results.

Why not just average the RGB values?

Paint mixes subtractively: each pigment absorbs part of the light. Averaging RGB values predicts that blue and yellow make grey, while real paint makes green. A pigment model gives much more realistic first tries.

How accurate are the recipes?

They are a first-try ratio. Real paints differ by brand, pigment load and medium, and colors shift as they dry. Mix a small amount, compare it next to your reference and adjust.

Is my photo uploaded anywhere?

No. The photo is opened and sampled inside your browser. Your paints and saved recipes are stored only in this browser.

Does it work for acrylic, oil, watercolor and gouache?

Yes. Ratios are in unitless parts, so you can measure them in drops, brush loads or palette-knife scoops for any opaque medium. For watercolor, add water instead of white to lighten.